Load balance across Pulsar brokers
Pulsar is an horizontally scalable messaging system, so it is a core requirement that the traffic in a logical cluster must be spread across all the available Pulsar brokers, as evenly as possible.
In most cases, this is true out of the box and one shouldn't worry about it. There are, though, multiple settings and tools to control the traffic distribution and they require a bit of context to understand how the traffic is managed in Pulsar.
Pulsar load manager architecture
Dynamic assignment of topics to brokers
Topics are dynamically assigned to brokers based on the load conditions of all brokers in the cluster.
When a client starts using new topics that are not assigned to any broker, a process is triggered to choose the best suited broker to acquire ownership of these topics according to the load conditions.
In case of partitioned topics, different partitions are assigned to different brokers. Here "topic" means either a non-partitioned topic or one partition of a topic.
The assignment is "dynamic" because it changes quickly. For example, if the broker owning the topic crashes, the topic will be reassigned immediately to another broker. Another scenario is that the broker owning the topic becomes overloaded. In this case, the topic is reassigned to a less loaded broker.
The dynamic assignment is made possible by the stateless nature of brokers, so you can quickly expand or shrink the cluster based on usage.
The assignment of topics/partitions to brokers is not done at the topics/partitions level, but done at the Bundle level (a higher level). The reason is to amortize the amount of information that you need to keep track. Based on CPU, memory, traffic load and other indexes, topics are assigned to a particular broker dynamically.
Instead of individual topic/partition assignment, each broker takes ownership of a subset of the topics for a namespace. This subset is called a "bundle" and effectively it's a sharding mechanism.
The namespace is the "administrative" unit: many config knobs or operations are done at the namespace level.
For assignment, a namespaces is sharded into a list of "bundles", with each bundle comprising a portion of overall hash range of the namespace.
Topics are assigned to a particular bundle by taking the hash of the topic name and seeing in which bundle the hash falls into.
Each bundle is independent of the others and thus is independently assigned to different brokers.
Creating namespaces and bundles
When creating a new namespace, it will set to use the default number of bundles. This is set in
# When a namespace is created without specifying the number of bundle, this # value will be used as the default defaultNumberOfNamespaceBundles=4
One can either change the system default, or override it when creating a new namespace:
bin/pulsar-admin namespaces create my-tenant/my-namespace --clusters us-west --bundles 16
With this command, we're creating a namespace with 16 initial bundles. Therefore the topics for this namespaces can immediately be spread across up to 16 brokers.
In general, if the expected traffic and number of topics is known in advance, it's a good idea to start with a reasonable number of bundles instead of waiting for the system to auto-correct the distribution.
On a same note, it is normally beneficial to start with more bundles than number of brokers, primarily because of the hashing nature of the distribution of topics into bundles. For example, for a namespace with 1000 topics, using something like 64 bundles will achieve a good distribution of traffic across 16 brokers.
Unloading topics and bundles
In Pulsar there is an admin operation of "unloading" a topic. Unloading means to close the topics, release ownership and reassign the topics to a new broker, based on current load.
When unload happens, the client will experience a small latency blip, typically in the order of tens of milliseconds, while the topic is reassigned.
Unloading is the mechanism used by the load-manager to perform the load shedding, but it can also be triggered manually, for example to correct the assignments and redistribute traffic even before having any broker overloaded.
Unloading a topic has no effect on the assignment, but it will just close and reopen the particular topic:
pulsar-admin topics unload persistent://tenant/namespace/topic
To unload all topics for a namespace and trigger reassignments:
pulsar-admin namespaces unload tenant/namespace
Namespace bundles splitting
Since the load for the topics in a bundle might change over time, or could just be hard to predict upfront, bundles can be split in 2 by brokers. The new smaller bundles can then be reassigned to different brokers.
The splitting happens based on some tunable thresholds. Any existing bundle that exceeds any of the threshold is a candidate to be split. By default the newly split bundles are also immediately offloaded to other brokers, to facilitate the traffic distribution.
# enable/disable namespace bundle auto split loadBalancerAutoBundleSplitEnabled=true # enable/disable automatic unloading of split bundles loadBalancerAutoUnloadSplitBundlesEnabled=true # maximum topics in a bundle, otherwise bundle split will be triggered loadBalancerNamespaceBundleMaxTopics=1000 # maximum sessions (producers + consumers) in a bundle, otherwise bundle split will be triggered loadBalancerNamespaceBundleMaxSessions=1000 # maximum msgRate (in + out) in a bundle, otherwise bundle split will be triggered loadBalancerNamespaceBundleMaxMsgRate=30000 # maximum bandwidth (in + out) in a bundle, otherwise bundle split will be triggered loadBalancerNamespaceBundleMaxBandwidthMbytes=100 # maximum number of bundles in a namespace (for auto-split) loadBalancerNamespaceMaximumBundles=128
Automatic load shedding
In Pulsar's load manager there is support for automatic load shedding. This means that whenever the system recognized a particular broker is overloaded, it will force some traffic to be reassigned to less loaded brokers.
When a broker is identifies as overloaded, it will force to "unload" a subset of the bundles, the ones with higher traffic, that make up for the overload percentage.
For example, the default threshold is 85% and if a broker is over quota at 95% CPU usage, then it will unload the percent difference plus a 5% margin:
(95% - 85%) + 5% = 15%.
Given the selection of bundles to offload is based on traffic (as a proxy measure for cpu, network and memory), broker will unload bundles for at least 15% of traffic.
The automatic load shedding is enabled by default and can be disabled with this setting:
# Enable/disable automatic bundle unloading for load-shedding loadBalancerSheddingEnabled=true
There are additional settings that apply to shedding:
# Load shedding interval. Broker periodically checks whether some traffic should be offload from # some over-loaded broker to other under-loaded brokers loadBalancerSheddingIntervalMinutes=1 # Prevent the same topics to be shed and moved to other brokers more that once within this timeframe loadBalancerSheddingGracePeriodMinutes=30
Broker overload thresholds
The determinations of when a broker is overloaded is based on threshold of CPU, network and memory usage. Whenever either of those metrics reaches the threshold, it will trigger the shedding (if enabled).
By default, overload threshold is set at 85%:
# Usage threshold to determine a broker as over-loaded loadBalancerBrokerOverloadedThresholdPercentage=85
The usage stats are gathered by Pulsar from the system metrics.
In case of network utilization, in some cases the network interface speed reported by Linux is not correct and needs to be manually overridden. This is the case in AWS EC2 instances with 1Gbps NIC speed for which the OS report 10Gbps speed.
Because of the incorrect max speed, the Pulsar load manager might think the broker has not reached the NIC capacity, while in fact it's already using all the bandwidth and the traffic is being slowed down.
There is a setting to correct the max NIC speed:
# Override the auto-detection of the network interfaces max speed. # This option is useful in some environments (eg: EC2 VMs) where the max speed # reported by Linux is not reflecting the real bandwidth available to the broker. # Since the network usage is employed by the load manager to decide when a broker # is overloaded, it is important to make sure the info is correct or override it # with the right value here. The configured value can be a double (eg: 0.8) and that # can be used to trigger load-shedding even before hitting on NIC limits. loadBalancerOverrideBrokerNicSpeedGbps=
When the value is empty, Pulsar will use the value reported by the OS.